Approximation of the Pressure-discharge Curve in Inline Drip Irrigation System

The efficiency of drip irrigation systems depends directly on the uniformity of water discharge from emission devices. Ideally, all emitters should discharge equal amounts of water, but variations occur due to hydraulic and manufacturing factors. This study established the pressure-discharge relationship curve and determined emitter flow variation caused by the hydraulic and the manufacturer’s coefficients of variation for 2 and 4 lph inline emitters. The power exponent and constant of the pressure-discharge curve were determined by measuring the emitter flow rates at operating pressures ranging from 0.2 to 3.0 kg/cm². The emitter flow rates of 100 emitters were measured at an operating pressure of 1.0 kg/cm² to determine the manufacturing coefficient (Vm) and emitter flow variation (qvar(m)). The discharge exponent was found to be 0.46 for both emitter flow rates, with proportionality constants of 0.692 for 2 lph and 1.387 for 4 lph emitters respectively. The results showed a strong correlation between pressure and flow rate, with RMSE values of 0.51 and 0.34 lph, and coefficients of determination of 0.988 and 0.991 for 2 and 4 lph emitters, respectively. High manufacturing precision was indicated by low Vm values of 0.0491 for 2 lph and 0.055 for 4 lph emitters, while qvar(m) values were 0.261 for 2 lph and 0.283 for 4 lph emitters. Total coefficient of variation (Vq) values were 0.1 for 2 lph and 0.14 for 4 lph emitters, with total emitter flow variations (qvar) of 0.29 for 2 lph and 0.39 for 4 lph emitters. The study established the pressure-discharge curve for inline drip irrigation systems, emphasizing the critical relationship between pressure and flow rate. The derived chart from pressure discharge relationship is a valuable tool for estimating emitter flow variation due to hydraulic variation within the same subunit. Precise manufacturing and effective management of hydraulic variations are essential for ensuring uniform water distribution, optimizing drip irrigation systems, and ultimately enhancing crop yield and resource utilization.