Items where Subject is "Engineering"

A

Abdlrahem, Abdlmnam and Albalawi, Hani (2017) A Multi-Model Approach to Design a Robust SVC Damping Controller Using Convex Optimization Technique to Enhance the Damping of Inter-Area Oscillations Considering Time Delay. Energy and Power Engineering, 09 (12). pp. 750-771. ISSN 1949-243X

Agudon, Aiza Marie E. and Bacquian, Bryan Christian S. (2021) Backside Chippings Improvement through Wafer Dicing Parameter Optimization and Understanding the Anistropic Silicon Properties. Journal of Engineering Research and Reports, 20 (7). pp. 144-152. ISSN 2582-2926

Ahuja, Amit Kumar and Chakka, Ram (2024) New Approaches to Telecom Receiver Design for Mitigating Radiation-Pollution in Environment: Solution towards Green Communications. In: Current Approaches in Engineering Research and Technology Vol. 3. B P International, pp. 97-138. ISBN 978-81-973454-0-1

Akramjon, Sarimsakov and Sardorbek, Isroilov and Shukhratjon, Komilov (2023) Improving Fiber Quality Output by Improving the Roll Box of the Gin Saw. Engineering, 15 (04). pp. 261-268. ISSN 1947-3931

Almuhsin, Essam and Soh, Ben and Li, Alice and Ullah, Azmat (2023) Requirement Engineering for E-Coaching in Higher Education. Engineering, 15 (05). pp. 275-290. ISSN 1947-3931

Ankrah, Abdulai Ayirebi and Kimotho, James Kuria and Muvengei, Onesmus Mutuku (2020) Fusion of Model-Based and Data Driven Based Fault Diagnostic Methods for Railway Vehicle Suspension. Journal of Intelligent Learning Systems and Applications, 12 (03). pp. 51-81. ISSN 2150-8402

Aravind, Abhishek and Bahirvani, Avinash G. and Quiambao, Ronald and Gonzalo, Teresa (2020) Machine Learning Technology for Evaluation of Liver Fibrosis, Inflammation Activity and Steatosis (LIVERFAStTM). Journal of Intelligent Learning Systems and Applications, 12 (02). pp. 31-49. ISSN 2150-8402

Ashwear, Nasseradeen and Elderrat, Haithem and Eljaarani, Mahmud A. (2020) Overcoming Effects from Environmental Temperature on the Natural Frequencies of Cable-strut Structures. Journal of Engineering Research and Reports, 13 (4). pp. 22-30. ISSN 2582-2926

B

Babenko, Grigory and Efimov, Vadim and Kiselev, Mikhail and Shkurin, Maksim (2022) Results of the Study of the Influence of External Cargo Parameters on the Helicopter Controllability. Aerospace, 9 (5). p. 229. ISSN 2226-4310

Bakar, Abu and Li, Ke and Liu, Haobo and Xu, Ziqi and Alessandrini, Marco and Wen, Dongsheng (2022) Multi-Objective Optimization of Low Reynolds Number Airfoil Using Convolutional Neural Network and Non-Dominated Sorting Genetic Algorithm. Aerospace, 9 (1). p. 35. ISSN 2226-4310

Berthelsen, Rolf and Wiederkehr, Thomas and Denzer, Ralf and Menzel, Andreas and Müller, Heinrich (2014) Efficient Simulation of Nonlinear Heat Transfer during Thermal Spraying of Complex Workpieces. World Journal of Mechanics, 04 (09). pp. 289-301. ISSN 2160-049X

Bolić, Tatjana and Castelli, Lorenzo and De Lorenzo, Andrea and Vascotto, Fulvio (2022) Trajectory Clustering for Air Traffic Categorisation. Aerospace, 9 (5). p. 227. ISSN 2226-4310

Buera, Maria Virginia S. and Mendoza, Mariane A. and Gomez, Frederick Ray I. (2021) Pattern Recognition System Program Advancement to Compensate Strip Expansion on 1-Map Strips. Journal of Engineering Research and Reports, 20 (7). pp. 138-143. ISSN 2582-2926

C

Carletta, Stefano and Pontani, Mauro and Teofilatto, Paolo (2022) Characterization of Low-Energy Quasiperiodic Orbits in the Elliptic Restricted 4-Body Problem with Orbital Resonance. Aerospace, 9 (4). p. 175. ISSN 2226-4310

Chen, Rixin and Dai, Ruoxi and Wang, Mingye (2020) Transcription Factor Bound Regions Prediction: Word2Vec Technique with Convolutional Neural Network. Journal of Intelligent Learning Systems and Applications, 12 (01). pp. 1-13. ISSN 2150-8402

Chien, Min-Hsiu and Ozalp, Nesrin and Morrison, Gerald (2016) Effect of Particle Type on Cyclone Formation Inside a Solar Reactor. Frontiers in Mechanical Engineering, 2. ISSN 2297-3079

Close, Liam and Kashef, Rasha (2020) Combining Artificial Immune System and Clustering Analysis: A Stock Market Anomaly Detection Model. Journal of Intelligent Learning Systems and Applications, 12 (04). pp. 83-108. ISSN 2150-8402

D

Delahaye, Daniel and García, Adrían and Lavandier, Julien and Chaimatanan, Supatcha and Soler, Manuel (2022) Air Traffic Complexity Map Based on Linear Dynamical Systems. Aerospace, 9 (5). p. 230. ISSN 2226-4310

H

Hasibuan, Samsul A. Rahman Sidik and Irwan, . and Kurniati, Dwi and Zhafira, Talitha (2023) Validation of Fixed-End Beam Analysis with Uniform Loads Using Android-Based Applications. Journal of Engineering Research and Reports, 24 (11). pp. 14-19. ISSN 2582-2926

Hoshoudy, G. A. (2014) Rayleigh-Taylor Instability in Magnetized Plasma. World Journal of Mechanics, 04 (08). pp. 260-272. ISSN 2160-049X

Huang, Chengwei and Liu, Yong and Bai, Bing and Wang, Ke (2022) The Flying and Adhesion Robot Based on Approach and Vacuum. Aerospace, 9 (5). p. 228. ISSN 2226-4310

J

Jaylo-Sia, Jonalyn and Pulido, Jonathan and Gomez, Frederick Ray (2021) Elimination of Intermetallic Coverage Over-etching on Aluminum Pad. Journal of Engineering Research and Reports, 20 (7). pp. 153-156. ISSN 2582-2926

Jia, John A. and Jia, Njideka I. (2024) Application of Machine Learning in the Characterization and Classification of Hazards in Underwater Operations in the Oil and Gas Industry. Journal of Engineering Research and Reports, 26 (8). pp. 236-246. ISSN 2582-2926

Jin, Kai and Yin, Zeyang and Lei, Yaolin and Zhang, Yuanlong and Zhang, Xiaolong (2022) Nonlinear Covariance Analysis-Based Robust Rendezvous Trajectory Design by Improved Differential Evolution Method. Aerospace, 9 (5). p. 277. ISSN 2226-4310

Johnson, Michael J. and Go, David B. (2016) Impingement Cooling Using the Ionic Wind Generated by a Low-Voltage Piezoelectric Transformer. Frontiers in Mechanical Engineering, 2. ISSN 2297-3079

K

Karpuk, Stanislav and Radespiel, Rolf and Elham, Ali (2022) Assessment of Future Airframe and Propulsion Technologies on Sustainability of Next-Generation Mid-Range Aircraft. Aerospace, 9 (5). p. 279. ISSN 2226-4310

L

Liu, Yue and Zhang, Hong-Tao and Zhao, Hong-Hao and Lu, Lin and Han, Ming-Yang and Wang, Jiao-Cai and Guan, Shuai and Xin, Haohui (2021) Experimental Study on Mechanical Properties of Novel FRP Bars with Hoop Winding Layer. Advances in Materials Science and Engineering, 2021. pp. 1-18. ISSN 1687-8434

Luo, Shihao and Cui, Naigang and Wang, Xiaowei and Fan, Youhua and Shi, Run (2022) Model and Optimization of the Tether for a Segmented Space Elevator. Aerospace, 9 (5). p. 278. ISSN 2226-4310

N

Naschie, Mohamed El (2014) Cosmic Dark Energy Density from Classical Mechanics and Seemingly Redundant Riemannian Finitely Many Tensor Components of Einstein’s General Relativity. World Journal of Mechanics, 04 (06). pp. 153-156. ISSN 2160-049X

Nguyen, Thanh Q. and de Oliveira Correia, José António Fonseca (2021) Separation of the Structure Signal by the Maximal Overlap Discrete Wavelet Transform and Fast Fourier Transform. Advances in Materials Science and Engineering, 2021. pp. 1-15. ISSN 1687-8434

O

Odinikuku, William E. and Udumebraye, Joseph E. and Atadious, David (2020) Prediction of Weld Bead Geometry of Mild Steel Using Taguchi Technique and Multiple Regression Analysis. Journal of Engineering Research and Reports, 13 (4). pp. 31-46. ISSN 2582-2926

Okpala, C. D. and Igbokwe, J. I. and Nwajinka, C. O. and Igbokwe, E. C. and Ubah, J. I. (2021) Gis-Based Multi Criteria Model for Location of Rice Aggregation Centers in Anambra State. Journal of Engineering Research and Reports, 20 (7). pp. 103-116. ISSN 2582-2926

P

Peng, Siqi and Zhang, Huibo and Qi, Chaoqun and Xu, Jialiang and Ma, Rui and Dai, Shijie (2022) Impact Pressure Distribution Recognition for Large Non-Cooperative Target in Ground Detumbling Experiment. Aerospace, 9 (5). p. 226. ISSN 2226-4310

R

Rushdi, Ali Muhammad Ali and Badawi, Raid Salih (2021) Utilization of the Karnaugh Map in Exploring Cause-effect Relations Modeled by Partially-defined Boolean Functions. Journal of Engineering Research and Reports, 20 (7). pp. 117-137. ISSN 2582-2926

S

Salas, Alexis and Jaramillo, Andrés Felipe and Palacio, Daniel Andrés and Medina, Carlos and Rojas, David and Ramírez, Jesús and Cabrera, Gustavo and Meléndrez, Manuel Francisco (2024) Next-Gen Hybrid Materials: Epoxy Matrices Enhanced by Covalently Anchored Alkylsilane-Nanoparticle Complexes. In: Current Approaches in Engineering Research and Technology Vol. 3. B P International, pp. 139-169. ISBN 978-81-973454-0-1

Sarafian, Haiduke (2014) Simulation of Transverse Standing Waves. World Journal of Mechanics, 04 (08). pp. 251-259. ISSN 2160-049X

Seyi, Ogundana Odunayo and Abdulakeem, Abdulkadri and Danladi, Jibril and Wumi, Owa Taiwo (2020) Design and Construction of Electric Fish Smoking Kiln Using Locally Available Composite Materials. Journal of Engineering Research and Reports, 13 (4). pp. 15-21. ISSN 2582-2926

Siad, Larbi and Gangloff, Sophie (2014) Effective Yield Strength for Material Powder Consolidated at Stage II Compaction. World Journal of Mechanics, 04 (09). pp. 273-288. ISSN 2160-049X

Sohal, Harbaljit S. and Vassilevski, Konstantin and Jackson, Andrew and Baker, Stuart N. and O’Neill, Anthony (2016) Design and Microfabrication Considerations for Reliable Flexible Intracortical Implants. Frontiers in Mechanical Engineering, 2. ISSN 2297-3079

Sun, Guanglin and Hu, Jiangchun and Wang, Hongfang and Li, Pengfei and Lusquiños, Fernando (2021) Experimental Study on the Deformation and Failure Characteristics of Anchor under Graded Loading and Corrosion. Advances in Materials Science and Engineering, 2021. pp. 1-11. ISSN 1687-8434

Sun, Xiaoqian and Wandelt, Sebastian and Zhang, Anming (2022) Travel Bubbles in Air Transportation: Myth or Reality? Aerospace, 9 (1). p. 38. ISSN 2226-4310

T

Taguchi, Hideyuki and Harada, Kenya and Kobayashi, Hiroaki and Hongoh, Motoyuki and Masaki, Daisaku and Nishida, Shunsuke (2022) Mach 4 Simulating Experiment of Pre-Cooled Turbojet Engine Using Liquid Hydrogen. Aerospace, 9 (1). p. 39. ISSN 2226-4310

Tiona, N.A. and Rahelivololoniaina, B.R. (2023) Broiler Feet Gelatine. Engineering, 15 (04). pp. 234-241. ISSN 1947-3931

W

Wang, Kelei and Zhou, Zhou (2022) Aerodynamic Design, Analysis and Validation of a Small Blended-Wing-Body Unmanned Aerial Vehicle. Aerospace, 9 (1). p. 36. ISSN 2226-4310

X

Xiong, Dapeng and Yang, Yinxin and Wang, Yanan (2022) An Improved Synthetic Eddy Method for Generating Inlet Turbulent Boundary Layers. Aerospace, 9 (1). p. 37. ISSN 2226-4310

Xu, Fangfang and Li, Hong and Zhang, Dongxu (2022) A Study on Dynamic Characteristics of Thin-Walled Cylindrical Cavities with a Large Aspect Ratio. Aerospace, 9 (4). p. 174. ISSN 2226-4310

Y

Yang, Liu and Li, Lianghui and Wei, Weijie and Cai, Xin (2021) Optimization of Caving Technology in an Extrathick Seam with Longwall Top Coal Caving Mining. Advances in Materials Science and Engineering, 2021. pp. 1-10. ISSN 1687-8434

Yang, Wenwei and Liu, Wei (2021) Fiber-Reinforced Magnesium Phosphate Cement-Based Nanocomposites in the Field of Bridge Structure Repair and Strengthening. Advances in Materials Science and Engineering, 2021. pp. 1-10. ISSN 1687-8434

Z

Zhang, Yong and Zhang, Jing (2020) Application of Dual Attention Mechanism in Chinese Image Captioning. Journal of Intelligent Learning Systems and Applications, 12 (01). pp. 14-29. ISSN 2150-8402